GB
│
IE
│
NI
│
11 ■
SKS 4 A1
NOTE
► To stop the alarm prematurely, set the main switch
! to the position if
you want the light to remain on, or if you want the sound and light to be
turned off.
Ŷ Set the main switch
!to the position if you only want to display the wake-
up time and bedtime with light, i.e. without sound.
Ŷ Set the Main switch
!to the position to deactivate all alarm signals.
NOTE
► When the light is activated, the illuminated area
lights up as soon as
you turn the main switch ! to the position or . If you do not want the
illuminated area
to light up for a long time, you can either activate the
alarm shortly before or at the set alarm times or deactivate the light com-
pletely (section "Switching the illuminated area on/ off").
Switching the night light on/off
You can also use the appliance solely as a night light. The motif disc with one
image
0is intended for this purpose.
To turn the night light on or off:
♦ Set the main switch
! to the position .
♦ If you have not already done so, switch on the LED light of the illuminated
area
(see section “Switching the illuminated area on/off”).
♦ Activate both LED lights of illuminated area
(see section “Setting the
illuminated area”).
The night light is on. To turn off the night light:
♦ Set the main switch
! to the position .
Set alarm time mode
You can set different alarm times for the days of the week and the weekend.
Use this function if you want your child to sleep and get up at other times on the
weekend than during the week.
♦ On weekdays (Mon–Fri) move the W./W.E. slider switch
to the position
W. and on weekends (Sat/Sun) to the position W.E.
For the preset times and setting options see section “Setting the alarm times”.
Adjusting the light intensity
♦ Set the brightness of the display using the slider switch on the
back of the appliance.
To Next Page
Loading...
Need help?
General
