Silvercrest SL 65 - Installation and System Configuration; Antenna Setup and Channel Scanning

51
Installation (symbol: satellite antenna)
Sub-menu Description
Satellite Satellite selection
(example: Astra1 19.2° East)
LNB Type Select LNB type
(default value is Universal)
22K 22KHz activation,
(Note: with LNB type Universal,
activation occurs automatically)
DiSEqC Select DiSEqC level
DiSEqC
Switch
Select DiSEqC command
Example:
Astra and Hotbird double
reception
Astra = 1 / 4
Hotbird = 2 / 4
Disable for positioner: Not
enabled
Positioner By pressing the “OK“ key you
will go to DiSEqC positioner
menu. Please refer to the
operating manual of your
DiSEqC motor for help.
Antenna setup
Polarity Horizontal, vertical, H/V
(automatic operation)
TP Scan
(manual
channel scan)
With this scanning function, you can scan the
preset frequencies (transponders) individually.
The transponder details can be changed