Silvercrest SMA 500 F1 - Page 8

GB
│
IE
│
5 ■
SMA 500 F1
► Before replacing any accessories or additional parts that
move during operation, the appliance must be switched
off and disconnected from mains power.
► Ensure that the appliance is stable and vertical before
switching it on. Otherwise, the appliance may tip over and
the hot milk will spill out.
► Do not touch the rotating parts during operation!
► Parts of the appliance get hot during use!
Therefore, touch the heated appliance only by the handle.
► After use, the surfaces of the heating elements will still have
some residual heat.
► Always remove the plug from the mains power socket when
the appliance is not in use or when you want to clean it.
CAUTION!
► Do not use an external timer switch or a separate remote
control system to operate the appliance.
► Never leave the appliance unattended during operation.
► Ensure that the appliance, the power cable and the plug
do not come into contact with sources of heat, such as
hotplates or open flames.
► Only operate the appliance when the lid is in place.
► Never operate the appliance when it is empty.
The appliance could be irreparably damaged.
► Do not clean the appliance or any parts of it in the
dishwasher!
Note: No user action is required to switch the product
between 50and 60Hz. The product adapts automatically to
either 50or 60Hz.