EasyManua.ls Logo

Silvercrest SMW 900 EDS B5 - User Manual

Silvercrest SMW 900 EDS B5
135 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
IAN 284999
STAINLESS STEEL MICROWAVE SMW 900 EDS B5
STAINLESS STEEL MICROWAVE
Operating instructions
ΦΟΥΡΝΟΣ ΜΙΚΡΟΚΥΜΑΤΩΝ
Οδηүίες χρήσης
EDELSTAHL-MIKROWELLE
Bedienungsanleitung

Table of Contents

Questions and Answers

  • D
    Diane MitchellAug 11, 2025
    What to do if Silvercrest SMW 900 EDS B5 Microwave Oven displays E02 and beeps?
    • B
      Brandon CordovaAug 11, 2025
      If your Silvercrest Microwave Oven displays 'E02' and beeps, it indicates a sensor error or an error during the appliance's heating up. Stop the program, let the appliance cool down, and then restart the microwave. If the error persists, contact Customer Support.
  • W
    wendycarrilloAug 17, 2025
    What to do if my Silvercrest Microwave Oven turntable makes a loud noise?
    • T
      Thomas JohnsonAug 17, 2025
      If the turntable in your Silvercrest Microwave Oven is making a loud noise when turning, it could be due to a couple of reasons: * The turntable might not be correctly positioned on the axle. Ensure it is properly inserted into the cooking area. * The small rollers or the floor of the cooking area might be unclean. Clean the rollers and the floor of the cooking area.
  • M
    Maria PughAug 23, 2025
    What to do if Silvercrest Microwave Oven displays E03 and beeps?
    • R
      rebecca32Aug 23, 2025
      If your Silvercrest Microwave Oven displays 'E03' and beeps, it means the microwave has switched into fault protection because of a short circuit or open-circuit voltage. Stop the program and remove the power plug. If possible, eliminate the cause of the problem, for example, remove any metals from the cooking area that might be causing issues when using the microwave function. Otherwise, contact Customer Support.
  • P
    Patricia HopkinsAug 28, 2025
    What to do if Silvercrest Microwave Oven displays E01 and beeps?
    • B
      Brianna SuttonAug 28, 2025
      If your Silvercrest Microwave Oven displays 'E01' and beeps, it indicates that the microwave has overheated. Immediately terminate the current program, remove the plug from the mains power socket, open the microwave door, and allow the appliance to cool down.
  • G
    gmcintoshSep 4, 2025
    Why is there nothing on the display of my Silvercrest Microwave Oven?
    • D
      Danielle StephensSep 4, 2025
      If there is nothing on the display of your Silvercrest Microwave Oven, it could be due to a few reasons: * The plug is not inserted into a mains power socket. Check that the plug is properly inserted. * The mains power socket is defective. Try another mains power socket.

Silvercrest SMW 900 EDS B5 Specifications

General IconGeneral
Power Output900 W
Capacity25 L
Control TypeElectronic
Number of power levels5
TypeMicrowave with Grill

Related product manuals