SPB 2600 C2
GB
│
13 ■
LED display Charge level
All LEDs are on 98–100%
Three LEDs are on 75–97%
Two LEDs are on 50–74%
One LED is on 20–49%
One LED is flashing < 20%
All LEDs are off 0%
Handling and operation
Charging mobile devices with the
Power Bank
♦ Insert the microUSB plug of the charging cable
into the microUSB charging port of the mobile
device, and insert the USB plug into the USB port
on the Power Bank. The charging process
starts automatically.
♦ If charging does not start automatically, press the
ON/OFF button
briefly to start the charging
process.
To Next Page
Loading...
