EasyManua.ls Logo

Silvercrest SPB 5.000 B1 - Disposal of the Packaging; Charging the Power Bank

Silvercrest SPB 5.000 B1
32 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
SPB 5.000 B1
GBIENI 7
Disposal of the packaging
The packaging protects the device from damage
during transport. The packaging materials have been
selected for their environmental friendliness and ease
of disposal, and are therefore recyclable.
Returning the packaging to the material cycle conserves raw
materials and reduces the amount of waste that is generated.
Dispose of packaging materials which are no longer needed
in accordance with applicable local regulations.
Charging the power bank
Before using the power bank, the integrated battery must be
fully charged.
CAUTION
Use the device only in dry interior rooms.
The power bank must never be charged and used for
charging external devices at the same time.
Due to the high current consumption, the power bank
must be charged using a USB mains adapter. Do not
charge the power bank via the USB port of a PC or
notebook.
Use only a USB mains adapter with an output voltage
of 5V and an output current of at least 2A to charge
the power bank.
Use only the supplied charger cable
to charge the
power bank!
Always disconnect the charger cable when charging
is complete!
Connect the USB plug of the charger cable
to a suitable
USB power supply (not supplied).
Connect the micro USB plug of the charger cable
to the
micro USB charging port on the power bank. A rough
estimate of the charge level is shown during charging by
means of the charge level LEDs :

Related product manuals