■ 4
│
GB
│
IE
SPM 2000 F3
■ All repairs must be carried out by authorised specialist
companies or by the Customer Service department. Failure to
make proper repairs can put the user at risk. It will also
invalidate any warranty claim.
■ Repairs to the appliance during the warranty period may only
be carried out by a customer service department authorised
by the manufacturer. Otherwise no warranty claims can be
considered for subsequent damage.
■ Defective components must always be replaced with original
replacement parts. Compliance with safety requirements can
only be guaranteed if original replacement parts are used.
■ Do not allow the power cable to come into contact with hot
appliance parts. NEVER use the appliance near naked flames,
a hotplate or a heated oven.
■ After use, allow the appliance to cool down completely before
cleaning it. Risk of burns!
■ Set up the appliance as close as possible to the electrical
power socket. Ensure that the power plug is quickly reachable
in case of danger, and also that there is no danger of tripping
over the cable.
■ Provide a stable location for the appliance.
HAZARD DUE TO ELECTRIC SHOCK!
► The appliance should only be connected to correctly
installed and earthed mains power sockets. Ensure that the
rating for your local power supply corresponds with the
details on the rating plate of the appliance.
► Arrange for Customer Services to repair or replace
connecting cables and/or appliances that are not
functioning properly or have been damaged.
► Do not expose the appliance to rain, and never use it in a
humid or wet environment.
To Next Page
Loading...
Need help?
General
