Silvercrest SRB 4 A1 - Disposal; Disposal of the appliance; Disposal of packaging

■ 8
│
GB
│
IE
│
NI
SRB 4 A1
Fitting/removing the scouring pad attachments
The scouring pad attachments (coarse/fine pad) 5/6 are attached to the pad
holder
8. This is provided with Velcro to make fitting and removal of the scouring
pad attachments
5/6 quick and easy.
♦ Press the scouring pad attachment
5/6 firmly onto the pad holder 8.
Make sure that the scouring pad attachment
5/6 is attached firmly and
centrally on the pad holder 8 (see fig. 4).
♦ To remove the scouring pad attachment 5/6, lift one side a little and then
pull it off the pad holder
8 (see fig. 5).
♦ Clean the pad holder
8 after use and before you attach another scouring
pad attachment 5/6.
Fig. 4 Fig. 5
Handling and operation
ATTENTION! PROPERTY DAMAGE!
► Do not use abrasive cleaning agents. They could irreparably damage the
surface you are cleaning.
► The hard bristles of the brush attachments
9/0 and the coarse scouring
pad attachment 5 can scratch or damage sensitive surfaces such as
glass, vehicle paintwork, stainless steel, copper, wood, etc. Test the brush
attachments 9/0 and the coarse scouring pad attachment 5 before
use on an inconspicuous patch of the area you want to clean.
NOTE
► Use the appliance with water. For more difficult stains use a mild cleaning
detergent. Apply the detergent directly onto the brush attachment
9/0
or the scouring pad attachment 5/6 and/or on the area you are clean-
ing before switching on the appliance.
► After every use, clean the appliance and the used attachments
5/6/8/9/0 as explained in the section Cleaning and maintenance.