GB│IE│NI
│
9 ■
SRB 4 A1
♦ Hold the appliance tightly over the area to be cleaned.
♦ Switch on the appliance by pressing the On/Off switch
2.
♦ Move the brush attachment
9/0 or the scouring pad attachment 5/6
over the area you are cleaning while applying a light pressure. Apply more
water and/or cleaning detergent, as needed, to the area to be cleaned.
♦ Once you have finished using the appliance, press the On/Off switch
2
again to switch it off.
Cleaning and maintenance
WARNING! RISK OF ELECTRIC SHOCK!
►
Do not immerse the hand unit 3 in water in order to clean it.
ATTENTION! PROPERTY DAMAGE!
► Do not clean the appliance with solvents, alcohol or abrasive cleaning
agents. These could damage the plastic surfaces of the appliance.
♦ Clean the hand unit
3 with a moistened cloth. For stubborn dirt, add a little
mild detergent to the cloth.
♦ Wash the attachments
5/6/8/9/0 under running water and with
some mild detergent. Rinse off the attachments 5/6/8/9/0 after-
wards with fresh water.
♦ Allow the hand element
3 and the attachments 5/6/8/9/0 to dry
completely before using them again or storing them.
Storage
♦ Store the appliance and the accessories in a clean, dry location out of
direct sunlight.
To Next Page
Loading...