Silvercrest SRB 4 A1 - Cleaning and maintenance; Storage

■ 6
│
GB
│
IE
│
NI
SRB 4 A1
Before use
Charging the internal battery
ATTENTION! PROPERTY DAMAGE!
► Due to the high current consumption, the appliance must be charged using
a USB mains adapter (not supplied). Do not charge the appliance from the
USB port of a PC or notebook.
► For charging the appliance use only protection class II power supply
approved for use with household products (output voltage/SELV output
5V, max. 2A).
► Use only the supplied USB charging cable
7 to charge the appliance.
► Disconnect the USB charging cable 7 when charging is complete.
NOTE
► The battery must be fully charged before using the appliance.
► Charging takes about 1.5 hours at a charging current of 2 A. When the
battery is fully charged, the appliance can be operated for up to
60 minutes.
1. Make sure that the appliance is switched off. To switch off the appliance,
press the On/Off switch
2.
2. Connect the USB-A plug on the USB charging cable
7 to a USB power
supply (see fig. 1). Insert the plug of the USB power supply into a mains
power socket.
3. Connect the USB-C plug of the USB charging cable
7 to the USB-C socket 4
on the appliance (see fig. 1). The battery charge indicator 1 lights up red
and the charging process begins.
Fig. 1
4. The battery charge indicator 1 lights up green as soon as the battery is
charged.
5. Disconnect the USB charging cable
7 from the USB-C socket 4 on the
appliance.