9
SRD 250 A2
GB
IE
Setting up and connecting
Setting up and connecting
Package contents and transport inspection
The appliance is delivered with the following components as
standard:
Clock Radio ●
Operating instructions ●
Extract the appliance and the instruction manual from the carton
and remove all pack
aging material.
NOTE
Check the contents to ensure everything is present and there ►
are no signs of visible damage.
If the contents are not complete or are damaged as a result
►
of defective packaging or through transportation, contact the
Service Hotline (see chapter Service).
Set-up location requirements
For safe and fault free operation of the appliance the set-up
location must comply with the following provisions:
Place the appliance on a fi rm, fl at and even surface . ■
Place the appliance so that the ventilation slots are not covered. ■
Do not place the appliance in a hot, wet or very humid location ■
or in the vicinity of fl ammable materials.
B_66666_SRD250A2_GB3u6 indd Abs2 9 15 06 2011 10 18 17 Uhr
To Next Page
Loading...
