15
SRD 250 A2
GB
IE
Handling and operation
Automatic Switch-off (“SLEEP” function)
With the “Sleep” function the device switches itself off after a time
lapse of between 60 and 10 minutes.
Press the ♦
/BAND button
9
to switch the device on.
Press the SLEEP button ♦
14
. In the display
2
the switch off time
60 minutes appears and the SLEEP-LED
6
blinks. Repeated
pressing of the SLEEP button
14
shortens the switch off time
by 10 minutes respectively.
Repeatedly press the SLEEP button ♦
14
until the desired switch off
time is shown in the display
2
. After a few seconds the radio
frequency appears in the display
2
again and the sleep LED
6
glows continuously.
To switch off the sleep function press repeatedly the SLEEP button ♦
14
,
until in the display
2
is shown. The SLEEP-LED
6
goes out.
Setting the display illumination
Set the DIMMER switch ♦
19
to HIGH if you want the indicators in
the display
2
to appear brighter.
Set the DIMMER switch ♦
19
to LOW if you want the indicators in
the display
2
to appear darker.
Set the DIMMER ♦
19
switch to AUTO if the indicator in the dis-
play
2
is to be set automatically dependant on the lighting
conditions.
B_66666_SRD250A2_GB3u6 indd Abs2 15 15 06 2011 10 18 18 Uhr
To Next Page
Loading...
