19GB/IE
Before connecting the product
to the power supply, check that
the voltage and current rating
corresponds with the power
supply details shown on the
product’s rating label.
Regularly check the mains
plug and the mains cord for
damages. If the mains cord is
damaged, it must be replaced
by a special cord or assembly
available from the manufacturer
or its service agent.
Operation
DANGER! Risk of burns!
During use the product gets hot.
Do not touch the product while
in use nor immediately after use.
The product must not be left
unattended while it is connected
to the supply mains.
Do not move the product while it
is in operation.
Do not use the product without
an inserted cooking pot.
Do not switch on the product
when the cooking pot is empty.
Do not cover the product or the
steam valve while it is in use or
shortly after use, when it is still
hot.
The product is not intended
to be operated by means of
an external timer or separate
remote-control system.
The heating plate is subject to
residual heat after use.
Use the product only with the
provided accessories.
Cleaning and storage
m
WARNING! Risk of injury!
Unplug the product from the
socket-outlet when not in use
and before cleaning. Allow the
product to cool before inserting/
removing parts, and before
cleaning the product. The inlet
must be dry before the product
is used again.
Before first use
1. Remove the packaging. Check if all parts are complete.
2. To remove residue originated from manufacturing process:
Fill the cooking pot
[] with water up to the CUP marking 4.
Start cooking for about 30 minutes (see “Steam cooking”).
3. Clean the product and its accessories (see “Cleaning and
care”).
Operation
CAUTION! Risk of scalding! Hot steam escapes from
the steam valve
[6] and upon opening the lid [1].
NOTES:
Before placing the cooking pot
[] into the main unit [],
make sure the outside of the cooking pot is dry and clean. A
wet cooking pot may damage the product.
Do not switch on the product when the cooking pot
[] is
empty.
o Assembling the cooking pot/steamer insert:
– Press the release button
[5] and lift the lid [1] up.
– Place the cooking pot
[] into the main unit [].
– Place the steamer insert
[] on top of the cooking pot []
if desired.
– Close the lid
[1] using the handle [].
To Next Page