- 6 -
As soon as the added water has left the cooking
bowl 4 by being completely turned to steam, the
rice cooker automatically switches back to the
"keeping warm" mode.
The red control lamp 6 extinguishes and the
yellow control lamp 5 starts to glow again.
The food is now completely steamed and is ready
to eat.
Troubleshooting
Defect Cause Solution
The device
does not func-
tion.
The rice cooker
is not plugged
in.
Push the power
plug into the
wall socket.
The power
socket is
defective.
Use a
different wall
power socket.
The yellow indi-
cator light 5
switches on, but
the cooking
process cannot
be started.
The cooking
bowl 4 is empty
and, as such,
the safety
switch cannot
be pressed
down.
Fill the cooking
bowl 4with the
foodstuffs to be
cooked.
Cleaning and care
Danger! Electric shock!
• ALWAYS remove the plug from the wall socket
before cleaning, and allow the appliance to
cool completely before cleaning and storing it!
• Make certain that no liquid comes into contact
with the heating plate and the insides of the rice
cooker.
• Use a dry cloth to clean the rice cooker housing
incl. the heating plate. Do not use harsh cleaners
and abrasive materials. These could damage the
upper surfaces.
• Clean the steaming attachment 3, the lid 2,
the cooking bowl 4, the plastic spoon and the
measuring cup in water containing a mild deter-
gent.
• Dry all parts before using the appliance again.
Disposal
Do not dispose of the appliance in your
normal domestic waste. This product is
subject to the provisions of European
Directive 2002/96/EC.
Dispose of the appliance through an approved dis-
posal centre or at your community waste facility.
Observe the currently applicable regulations.
In case of doubt, please contact your waste dis-
posal centre.
Dispose of all packaging materials in an
environmentally friendly manner.
To Next Page
Loading...
Need help?
General
