Silvercrest SRR 3 A1 User Manual

SilverCrest SRR 3 A1
English - 9
Prior to use
Remove the shaver and the accessories from the packaging.
Check the shaver for signs of damage. If damaged, the shaver may not be
used.
The shaver can be operated via a battery or mains supply.
Charging the battery
The shaver is equipped with an integrated environmentally friendly NiMH
high-performance battery. You can charge it with the supplied mains
cable.
To extend the built-in battery life, we recommend that you discharge
the battery fully before recharging it. The charging indicator [5]
flashes red when the battery is fully discharged.
To charge the battery, connect the mains cable to the mains connection
[7]. Then plug the other end of the mains cable into a mains socket. The
charging indicator [5] lights up red while charging. A full charge cycle
takes approximately 60 minutes. If charging is complete, the charging
indicator [5] flashes green. Then unplug the cable from the mains socket to
save energy.

Silvercrest SRR 3 A1 Specifications

General

Brand	Silvercrest
Model	SRR 3 A1
Category	Electric Shaver
Language	English