SilverCrest SRR 3 A1
English - 15
Maintenance
Replace the shaving heads every two years to consistently achieve optimal
shaving results.
You can obtain information on spare parts via our service hotline (see
page 22).
Unplug the shaver from the mains power supply before maintenance
as there is a risk of an electric shock!
Switch off the shaver before maintenance in order to avoid hazards.
Proceed as follows to replace the shaving heads:
Remove the protective cover [1]. Press the release
button [3] to open the shaving system.
By pulling, you prise the shaving head holder
from its locking mechanism. Then remove the
shaving head holder.
To Next Page
Loading...
