SRW 250 A1 Alarm Clock Radio
118 - English
You can use backup batteries so you do not have to re-
program all your custom settings if there is a power cut.
For more information, please read the “Inserting the
Backup Batteries” chapter on page 126.
Getting started
Switching the Device On/Off
To power the device on, press the OFF/ON button [2]. When switched
on, the FM LED [23] or the AM LED [24] lights up and the device shows
the current frequency for a few seconds and then the time on the display
[10].
To power the device off, press the OFF/ON button [2] again. When
powered off, the current time is shown on the display [10].
Setting the Time
The time can only be set while the device is powered off. If it is still
powered on, press the ON/OFF button [2] to power the device off.
Press the TIME/DIMMER button [1] until the hour display flashes
[10].
To Next Page
Loading...
