Silvercrest SSA01A User Manual

11GB
Hints: To reset a programme, enter the
programming mode. Select the appropriate
programme and press the ON/OFF button
[9].
To return to the time display, press the CLOCK
button. Alternatively, the display automatically
returns to the time display after 15seconds.
 Countdown Setting
1. When LCD is in real time display, press
V- Button
[3] once to change to countdown
setting display, “d
ON
(or
OFF
)” will be
shown on the lower left corner of the LCD;
“d”:indicates the program is in countdown
mode “d
ON
” is set, device will be switched
on until the counter expires.“d
OFF
” is set,
device will be switched off until the countdown
expires.
2. Press the SET button
[4] to start the settings.
Set the number of hours, minutes and seconds.
To set the desired number, proceed as
described in “Setting the weekday”. The
number of seconds is also set equivalent to the
number of hours.
3. Connect the Timer to the AC socket and set the
Timer to AUTO status in order to start/stop
the countdown functions.
4. Press the C.D. button
[8] to start the set
countdown. Press the C.D. button again to end
the countdown mode.
Hints: Press the “V-” button to display the
countdown details. To change your settings, repeat
steps #1 to #2 in this section.
 Random mode
The random mode switches connected devices on
and off at irregular intervals.
1. Start the random mode by pressing the RND
button
[7]. Connected devices will be switched
off for 26minutes to 42minutes. The switch-on
phases last for 10minutes to 26minutes.
2. To disable the random mode, press the RND
button
[7] again.
 Turning On/ off
 Preset your desired On/off programs on the
Timer as mentioned above
 Turn off the connecting device which will
connect
 Plug the connecting device into the power
outlet
[2] of the product.
 Plug the product from the power supply.
 Switch on the connecting device.
 Appliance will then be turned on/off according
to your preset programs
 To unplug connected device from the product;
Turn off the connected device firstly. Then
unplug the product from the power supply.
Now you may unplug the connecting device
from the product.
 Cleaning and care
 Cleaning
m
WARNING! During cleaning or operation,
do not immerse the product in water or other
liquids. Never hold the product under running
water.
 Before cleaning: Unplug the product from the
power supply. Unplug any connected device
from the product.
 Clean the product only with a slightly
moistened cloth.
 Do not allow any water or other liquids to enter
the product’s interior.
 Do not use abrasives, harsh cleaning solutions
or hard brushes for cleaning.
 Let the product dry afterwards.
 Storage
 When not in use, store the product in its
original packaging.
 Store the product in a dry, secure location
away from children.

Silvercrest SSA01A Specifications

General

Brand	Silvercrest
Model	SSA01A
Category	Accessories
Language	English