10 GB
Setting the weekday
1. Press and hold the SET button[4] until the day
of the week flashes on the display. The days
are displayed in the following order:
Mo Tu We Th Fr Sa Su.
2. Press Λ+ Button
[5]/V- Button[3] once will
increase or reduce the day by sequence
slowly. To press and hold the button, the week
display moves quickly. Release the button until
your desired day of the week shown on the
display. Press SET Button
[4] to confirm your
setting or wait until the selected day of the
week stops flashing.
Setting the time
After setting the day of the week, hour display
flashes to indicate setting time can be started.
1. Press Λ+ Button
[5] to increase number of
hour, or V- Button
[3] to reduce hour.
2. Press Λ+/V- Button once will increase or
reduce each hour slowly. To press and hold the
button, the hour display moves quickly. Release
the button until your desired hour shown on the
display. Press SET Button
[4] to confirm your
setting.
3. “Minute” display then flashes to indicate
setting minute is ready. Repeat step #1 and #2
to set Minutes.
Setting the summer time
1. Press CLOCK Button[2] and V- Button[3] at
the same time to change to summer time, time
display automatically adds one hour and “S”
is shown on the LCD.
2. By pressing CLOCK Button
[2] and V-
Button
[3] again to cancel the summer time
setting.
m
Attention: LCD must be in real time display
to start week and time setting. If LCD is in
program setting display, press CLOCK
Button
[2] once to return to real time display.
Set up Programming
When the LCD is in real time display, press Λ+[5]
button once to change to program setting display,
“1
ON
” will be shown on the lower left corner of
the LCD;
“1” indicates the program group’s number
(program group is from 1 to 14)
“ON” indicates power on time.
“OFF” indicates power off time
1. Set programme group can be selected using
the “Λ+”
[5] or “V-” button[3] as described
in “Setting the time”. The groups are displayed
as follows: 1
ON
, 1
OFF
… 20
ON
, 20
OFF
and
d
ON
/
OFF
(Countdown);
Select the programme group, press the SET
button
[4];
Select the weekdays OR weekday
combinations for this programme; press the
“Λ+” button
[5]. The display shows the days
of the week OR weekday combinations in the
following order:
MO TU WE TH FR SA SU
MO −> TU −> WE −> TH −> FR −> SA −> SU
MO WE FR
TU TH SA
SA SU
MO TU WE
TH FR SA
MO TU WE TH FR
MO TU WE TH FR SA
2. Press “V-” button
[3] to display the
combinations in reverse sequence;
3. Confirm your setting by pressing the SET
button
[4].
4. After the weekday setting, further set the
associated hours. Please observe #1 to #2 in
“Setting the time”.