Silvercrest SSC 200 B1 - Page 13

SilverCrest SSC 200 B1
English - 11
 If you notice visible damage to the slow
cooker or the power cord (10), switch off
the device, remove the mains plug from the
mains socket, and contact customer service
(see "Warranty information" on page 29).
 Only connect the slow cooker to a properly
installed, easily accessible mains socket with
the same mains voltage as detailed on the
rating plate. After connecting the appliance,
the mains socket must still be easily
accessible so that you can remove the mains
plug quickly in the event of an emergency.
 Never immerse the heater unit (8), the
power cord (10) or the mains plug in water
or other liquids. If liquid does penetrate the
heater unit (8), disconnect the mains plug
from the mains socket immediately and
contact our hotline (see "Warranty
information" on page 29).