EasyManuals Logo

Silvercrest SSK 400 A1 User Manual

Silvercrest SSK 400 A1
35 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #11 background imageLoading...
Page #11 background image
12
GB/CY
Checks
Before each use, check:
the product for damage,
that the accessories are in good condition,
the controls for damage,
that the ventilation slits are clean and
unobstructed
Never use a damaged product or
accessories� Have them checked and
repaired by the manufacturer, its customer
service team or a similarly qualied person.
z Storage
CAUTION! Risk of damage!
Improper handling of the product
may result in damage to the
product
All parts must be cleaned, fully dried and
allowed to cool down before storage
Protect the product from direct sunlight
Place the product in a position where it
cannot fall into water
Store the product in a clean, dry, frost-free
place out of the reach of children
When the product is not in use, store it
inside the packaging in a dry place
Clean the product thoroughly (see chapter
“Cleaning”)�
Wind up the mains power cable without
creating knots or kinks
Always store the product’s parts and
accessories together with the product
If possible, keep the product in the original
packaging
z Troubleshooting
= Fault
= Cause
= Solution
= The product fails to switch on�
= The product is not connected to the
power outlet / the power outlet is not
carrying a current�
= Connect the product to a power
outlet� Check that the power outlet is
switched on� Switch on the power
outlet�
= The blender jug
7
is not properly
seated on the drive unit
4
, so there
is no electrical contact
= Place the blender jug
7
on the drive
unit
4
, ensuring that it is seated
properly
= The blades are not rotating
= There is unsuitable or excessive food
in the blender jug
7
= Turn the control knob
5
to “0”
8
and disconnect the mains plug from
the power outlet� Empty the blender
jug
7
z Disposal
Note the labels on the packaging
materials when sorting the waste;
they are marked with abbreviations
(a) and numbers (b) with the
following meanings:
1-7: Plastics
20-22: Paper and cardboard
80-98: Composite materials
You can nd out how to dispose of
the used product by contacting your
local district or city council�
In the interest of environmental
protection, when the product has
reached the end of its useful life, do
not dispose of it as general
household waste but have it
properly recycled� For information
on recycling centres and their
opening times, please contact your
local council�

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Silvercrest SSK 400 A1 and is the answer not in the manual?

Silvercrest SSK 400 A1 Specifications

General IconGeneral
BrandSilvercrest
ModelSSK 400 A1
CategoryBlender
LanguageEnglish

Related product manuals