EasyManuals Logo

Silvercrest SSM 200 A1 User Manual

Silvercrest SSM 200 A1
45 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
GB
 5
SSM 200 A1
Assembly
1) Remove all packaging materials and any stickers
from the appliance.
2) Clean the appliance as described in the section
“Cleaning and Care”.
3) Place the motor unit on a flat surface.
4) Push the blade roller into the roller housing .
The drive shaft must project into the opening
of the roller housing .
5) Screw the end cap onto the roller housing ,
until the outlet is pointing downwards and
the end cap no longer turns. In doing so,
turn the end cap in a clockwise direction, as
indicated on the roller housing :
.
6) Push the assembled roller housing into
the motor unit , so that the feed tube
is slightly offset (see figure B on the fold-out
page). The arrow on the roller housing must
point to the
symbol on the motor unit .
The catches on the roller housing must grip
into the recesses on the motor unit
. Turn
the roller housing so that the feed tube 
is pointing upwards, the arrow on the roller
housing is pointing to the
symbol on the
motor unit and the roller housing clicks
into place (see figure C on the fold-out page)
.
7)
Place t
he pusher into the feed tube .
NOTE
The pusher lid can be removed.
For removal:
Turn the pusher lid anticlockwise until it
allows itself to be removed.
For set up:
Place the pusher lid on the pusher ,
so that both locking mechanisms on the
pusher lid slide through the slots on the
pusher and then turn the pusher lid
in clockwise direction so that it is firmly
held in place.
8) Insert the plug into a mains power socket.
The appliance is now ready for use.
Preparing ingredients
CAUTION! MATERIAL DAMAGE!
Do not process fruits with stones or cores.
Do not process whole nuts.
Do not process ice cubes.
Peel fruits such as bananas or kiwis.
Remove cores, stones or stems from the fruit.
Cut the fruit into small pieces so that it will easily
fit through the feed tube .
Ingredients such as such as cooking chocolate
must be crushed into small pieces.
Put the prepared fruit in freezer bags or plastic
tubs and place them into the freezer for approxi-
mately 24 hours (-18°C).
NOTE
Instead of freezing fresh fruit, you can use fruit
that has already frozen from the deep-freezer.

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Silvercrest SSM 200 A1 and is the answer not in the manual?

Silvercrest SSM 200 A1 Specifications

General IconGeneral
BrandSilvercrest
ModelSSM 200 A1
CategoryKitchen Appliances
LanguageEnglish

Related product manuals