15 GB/IE/NI
door signal acoustically. Press again the signal type selector
button
3
. The receiver will now indicate the door signal in an
optical way.
When the battery of receiver is drained, signal indicator will
flash. You can replace the used battery with a new one of the
same type.
Setting the volume
Press the volume button
5
until the desired volume is reached.
There are a total of 4 possible volume settings: very loud, loud,
medium, soft.
Selecting the chime
Note: The product has 16 different chimes.
Press the melody selection button
4
. The first audible signal
sounds.
Press the melody selection button
4
again to move on to the
next audible signal.
Repeat this process until you have selected your desired audible
signal. The last-selected audible signal is automatically stored.
To Next Page
Loading...
