14 GB
Airflow modes
Press
22
repeatedly to select the desired
airflow mode:
Press
Mode description
1x
Natural
– constant cycling
through different airflow speeds.
Amending airflow speed: In natural
mode, press
21
repeatedly:
1x Mainly low speed
2x Half low half high speed
3x Mainly high speed
2x
Sleep
– constant cycling through
3 different speed modes (if started from
speed mode 3). The product decreases
the speed mode every 15minutes and
then stays at the lowest speed mode.
3x
Soft
– constant soft airflow.
4x
Normal – constant airflow at the
currently selected airflow speed
(from 1 to 6).
NOTE: The normal mode is the
default mode once power is on.
Timer (automatic switch off time)
When the product is on, press
24
repeatedly
to set the automatic turn off time. You can choose
from 1 to 8 hours.
Cleaning and care
Before cleaning, press
23
and unplug the
product from the power supply to completely
switch off the product. Remove the battery from
the remote control
31
before cleaning. Use a
dry lint-free cloth to clean the contacts on the
battery / rechargeable battery before inserting!
m WARNING! Do not immerse the electrical parts
of the product in water or other liquids. Never
hold the product under running water.
Clean the product with a slightly moistened cloth.
Do not allow any water or other liquids enter the
product‘s interior.
Do not use abrasives, harsh cleaning solutions or
hard brushes for cleaning.
Let all parts dry afterwards.
Cleaning the blade and the
safety guard
Dust collections on blade
4
and on the
grilles
2
/
6
can be removed with a brush
(not supplied). In case of serious soiling, the front
grille
6
can be removed for thorough cleaning.
To do so, reverse the steps of the “Assembly”
chapter.
Wipe the grilles
2
/
6
and blade
4
with
a damp cloth. For stubborn soiling use a mild
detergent on the cloth. Dry completely before
re-assembling them.
NOTE: The grilles
2
/
6
act as safety guards
to protect the user from touching the blade
4
.
m DANGER! Ensure that the product is switched
off from the supply mains before removing the
guard.
Mount the front grille
6
back onto the product
when cleaning is complete.
To Next Page
Loading...
Need help?
General
