Silvercrest SVG 2.0 A3 User Manual

SilverCrest USB 2.0 Video Grabber SVG 2.0 A3
English - 9
Connection overview
Connect the adapter (5) to the video grabber (1). Insert the adapter into the jack at the back of the
video grabber (see diagram).
Video grabber
Adapter
Snapshot button
1
S-Video input
Stereo audio input (white/red)
Composite video input (yellow)
Connecting to your PC
In order to record with the video grabber, you must first install the software (POWERDIRECTOR). If
you haven't already done so, go to the section entitled "Installing the software" and follow the
instructions.
 Connect the adapter (5) to the video grabber (1) as shown in the previous diagram.
1
This button generates a snapshot (photo of the current video) when the recording mode of the
enclosed PowerDirector software is activated.

Silvercrest SVG 2.0 A3 Specifications

General

Brand	Silvercrest
Model	SVG 2.0 A3
Category	Media Converter
Language	English