Silvercrest SWDR 500 A1 - World Clock Display

SilverCrest SWDR 500 A1
24 - English
 Press the "VOL-" (12) and "VOL +" (4) buttons to set the month. Press the
"SET/STORE" button (9) to confirm the setting. The day digit flashes.
 Press the "VOL-" (12) and "VOL +" (4) buttons to set the day. Press the
"SET/STORE" button (9) to confirm the setting.
The day of the week (40) is calculated automatically and shown on the display
(6).
Display Day of the week
MON Monday
TUE Tuesday
WED Wednesday
THU Thursday
FRI Friday
SAT Saturday
SUN Sunday
 You have finished the setting.
 If you have selected the 12-hour clock format, the "PM" icon (36) appears
on the display (6) for post meridian clock hours.
Please note that you should adjust the clock when you move into a
different time zone.
Displaying the world clock
Press the "DISPLAY" button (5). The time is shown in large digits on the display
(6). Additionally, you can show the time for a specific time zone in the upper
part of the display. Use the "TUNE-" (13) or " TUNE+" (11) button to select the
time zone for which you want to know the current time. After this, with each
press of the "DISPLAY" button (5) the selected time zone and the corresponding
time are displayed.
Please remember that the time zone is being displayed only. To set the time
zone, proceed as described in the "Setting the time zone" chapter.