Silvercrest swv 300 b2 - WPS - The easiest type of configuration

SilverCrest SWV 300 B2
16 - English
First use
Setting mode
Select the desired mode using the mode selector (10). To do so, move the
mode selector (10) to the desired position (Repeater, Client or Access Point).
Repeater Mode
Repeater Mode is used to extend the range of your wireless network. Wireless
devices, which are outside the range of your wireless network, can be
connected to the network via the dual-band wifi range extender.
Range without dual-band wifi range
extender
Range with dual-band wifi range
extender
The mode selector (10) must be set to the "Repeater" position for Repeater
Mode.