Silvercrest swv 300 b2 User Manual

SilverCrest SWV 300 B2
English - 27
WPS - The easiest type of configuration
This is the easiest way to configure the dual-band wifi range extender. First,
check whether your wireless router supports WPS. For further details, please
read the operating instructions for your wireless router.
1. Press the WPS button (6) on the dual-band wifi range extender for at least 6
seconds. The Power/WPS LED (3) now flashes for approx. 2 minutes.
2. Within these 2 minutes, please press the connection button (WPS) on your
wireless router. For further details, please read the operating instructions for
your wireless router.
(Symbolic representation, connection button (WPS) can be differently arranged
and referred to depending on the router model.)

Silvercrest swv 300 b2 Specifications

General

Brand	SilverCrest
Model	SWV 300 B2
Category	Extender
Type	Wi-Fi Range Extender
Frequency Band	2.4 GHz
Maximum Speed	300 Mbps
Button	WPS
Wireless Standard	802.11n
Antennas	2
Security	WPA2, WPA