Silvercrest swv 733 a1 - Initial Use; Setting Mode

SilverCrest SWV 733 A1
20 - English
Access Point (AP)
This mode can be used, for example, to provide a router without its own wireless network as a "wireless
router". The router must be connected to the dual-band wifi range extender via the LAN cable (network
cable, see "Supplied items").
Initial use
Setting mode
Select the desired mode using the mode selector (8). To do so, move the mode selector (8) to the
desired position (Access Point, Repeater or Client).
If you are opening the configuration menu of the dual-band wifi range extender for
the first time, you will be prompted to change the password. To do so, click on the
OK button.