SilverCrest SWV 733 A1
English - 21
Repeater mode
Repeater mode is used to extend the range of your wireless network. Wireless devices, which are
outside the range of your wireless network, can be connected to the network via the dual-band wifi
range extender.
Range without dual-band wifi range extender Range with dual-band wifi range extender
The mode selector (8) must be set to the "Repeater" position for Repeater mode.
The dual-band wifi range extender should be placed near (approx. 2-3
metres) the wireless router the first time it is used.
To Next Page
Loading...
