Silvercrest swv 733 a1 - Manual Configuration

SilverCrest SWV 733 A1
English - 23
WPS - The easiest type of configuration
This is the easiest way to configure the dual-band wifi range extender. First, check whether your wireless
router supports WPS. For further details, please read the operating instructions for your wireless router.
1. Press the WPS button (9) on the dual-band wifi range extender for at least 5 seconds. After you have
released the WPS button (9), the Power/WPS LED (4) will flash rapidly for approx. 2 minutes.
2. Within these 2 minutes, please press the connection button (WPS) on your wireless router. For further
details, please read the operating instructions for your wireless router.