Silvercrest SWV 733 A2 User Manual

SilverCrest SWV 733 A2
English - 23
WPS - The easiest type of configuration
This is the easiest way to configure the dual-band Wi-Fi range extender. First, check whether your
wireless router supports WPS. For further details, please read the operating instructions for your wireless
router.
1. Press the WPS button (9) on the dual-band Wi-Fi range extender for at least 5 seconds. After you
have released the WPS button (9), the Power/WPS LED (4) will flash rapidly for approx. 2 minutes.
2. Within these 2 minutes, please press the connection button (WPS) on your wireless router. For further
details, please read the operating instructions for your wireless router.

Silvercrest SWV 733 A2 Specifications

General

Brand	Silvercrest
Model	SWV 733 A2
Category	Extender
Language	English