SilverCrest SWV 733 A2
English - 31
After the reboot has been completed, the dual-band Wi-Fi range extender is accessible under the SSID
and the network key of your wireless router.
If you would like to return to the configuration menu, you can enter http://repeater.setup in the
address line of the Internet browser. Note that a connection must be established with the dual-band Wi-
Fi range extender for this purpose. To do so, connect the dual-band Wi-Fi range extender if necessary to
your computer via a network cable.
Once the connection has been successfully established, the field strength indicator (1) displays the signal
strength. The dual-band Wi-Fi range extender can then be used. The dual-band Wi-Fi range extender
can now be accessed via the previously specified SSID (Wi-Fi name) and the network key of your
wireless router.
You can then use the dual-band Wi-Fi range extender where the wireless signal is to be extended. The
optimal location for the dual-band Wi-Fi range extender is exactly in the middle between your wireless
router and the wireless devices which are to be connected to the network using the dual-band Wi-Fi
range extender. Test other locations if the dual-band Wi-Fi range extender does not work there. Insert
the dual-band Wi-Fi range extender only into a socket that is always easily accessible.
To Next Page
Loading...
