SilverCrest SWV 733 A2
English - 35
(Symbolic representation, connection button (WPS) can be differently arranged and referred to
depending on the router model.)
The dual-band Wi-Fi range extender then automatically connects to your wireless router and copies all
of the settings. It may take up to a minute for the connection to be established. Once the connection has
been successfully established, the field strength indicator (1) displays the signal strength. You can then
use the dual-band Wi-Fi range extender where your end device is to be connected wirelessly with your
router.
Connect the dual-band Wi-Fi range extender to your end device. Use the network cable included with
the device for this purpose. Insert one end of the network cable into the WAN/LAN socket (6) or the
LAN socket (7) of the dual-band Wi-Fi range extender and the other end into the LAN socket of your
end device. Insert the dual-band Wi-Fi range extender only into a socket that is always easily accessible.
If your wireless router does not support WPS or the connection fails for some other reason, you must
manually configure the dual-band Wi-Fi range extender.
To Next Page
Loading...
