SilverCrest SWV 733 A2
English - 45
Open the Internet browser on your computer. Enter http://repeater.setup in the address line of the
Internet browser and confirm the entry with the Enter button.
The login window of the dual-band Wi-Fi range extender opens. Select the desired language and enter
the user name and password (factory default for both: admin). The connection to the dual-band Wi-Fi
range extender is established in an encrypted manner. If you want to establish an unencrypted
connection (not recommended), deselect Security (Private SSL). Then click on the Login button. A
message may be displayed that the certificate might not be secure. Please accept the certificate as it is
from the manufacturer and is secure. The configuration menu of the dual-band Wi-Fi range extender now
opens.
If you are opening the configuration menu of the dual-band Wi-Fi range extender for
the first time, you will be prompted to change the user name and password.
The user name must consist of at least 8 characters in a combination of upper case
and lower case. Numbers and special characters are optional.
The password must consist of at least 10 characters in a combination of upper case,
lower case, numbers and special characters.
Take particular note of the user name and password or keep it in a safe place!
To Next Page
Loading...
