Page 12
6. Cleaning & Maintenance
Replacing the LED Lamps
DANGER
Always switch off and disconnect power before replacing the lights. Failure to do
so may cause serious injury. Please be aware that the light bulb will retain heat for a
short period of time after being switched off.
Disconnect the hood from mains.
Remove the power connection of LED lamp.
Press on the lamp with your hand to remove
the lamps.
Remove the adhesive tape around the lamp
frame from the body plate.
Before placing the new LED bulb, remove the protective foil on
the frame and stick it on its position on the appliance body.
To Next Page
Loading...
