Silverline 423352 - User Manual

Questions and Answers

D
Danielle SwansonAug 11, 2025
What to do if Silverline Accessories Lithium Jump Starter stops charging and beeps?
- E
  Eric ParsonsAug 11, 2025
  If your Silverline Accessories Lithium Jump Starter stops charging and starts beeping, it indicates a charging problem. Here's what to do: 1. Press and hold the Power Button for 10–30 seconds to try to continue charging and correct the issue. 2. After holding the Power Button, disconnect the charger from the wall and let the jump starter reset. 3. Reconnect the charger to see if it charges normally. 4. If it continues to beep and not charge, disconnect the power supply immediately and stop using it. Consult a Silverline technician.
B
Bonnie BartonAug 21, 2025
What to do if Silverline 423352 Accessories Lithium Polymer Battery Pack becomes hot or swells?
- M
  Matthew CampbellAug 21, 2025
  If the Lithium Polymer Battery Pack in your Silverline Accessories gets hot to the touch or starts to swell during use, it means the battery pack is faulty. Immediately disconnect the power supply/cables and stop using the device. Consult a qualified Silverline technician for assistance.
K
kathryn62Sep 1, 2025
Why won't my Silverline 423352 Lithium Jump Starter switch ON?
- K
  Kimberly RobertsSep 1, 2025
  If your Silverline Accessories Lithium Jump Starter won't switch on, it's likely because the Lithium Polymer Battery Pack has no charge. Charge the unit using the supplied AC power supply. If it still doesn't switch on after charging, the battery may be at the end of its life and needs disposal according to local regulations.

Silverline 423352 Specifications

General

Brand	Silverline
Model	423352
Category	Accessories
Language	English

Silverline 423352 - User Manual

Table of Contents

Questions and Answers

Silverline 423352 Specifications