RF Exposure Requirements
To ensure compliance with FCC RF exposure requirements, the antenna used
for this device must be installed to provide a separation distance of at least
30 cm from all persons and must not be co-located or operating in
conjunction with any other antenna or radio transmitter. Installers and
end-users must follow the installation instructions provided in this user
guide.
CE Statement
The PRO RANGE system is intended to be used by suitably trained
individuals or organisations who are familiar with the requirements of the
R&TTE directive. In particular the client must ensure that appropriate
antennas and transmit power levels are selected to ensure that all power
limits are met. Hereby, SilverNet Limited declares that this device is in
compliance with the essential requirements and other relevant provisions of
the R&TTE Directive 1999/5/EC. However, the use of the following warning
symbol
Means that this equipment is subject to restrictions of use in certain
countries and selection of the correct country of operation (country code)
will ensure that the device operates only on the frequencies permissible
within that country. It is also the operator’s responsibility to ensure that
appropriate licenses have been sought when operating on licensed
frequencies, for example UK Band C, 5725-5850 MHz
Copyright Information
Copyright ©2017 all rights reserved. No part of this publication may be
reproduced, adapted, stored in a retrieval system, translated into any
language, or transmitted in any form or by any means without the written
permission of the supplier
To Next Page
Loading...