To Next PageTo Next Page
Need help?Do you have a question about the SilverStone MILO Series and is the answer not in the manual?
General| Model | MILO Series |
|---|---|
| Form Factor | Mini-ITX |
| Material | Steel |
| Front I/O Ports | USB |
| Power Supply | SFX |
Switch below front panel adjusts LED brightness. Recommended to adjust when PC is on and panel closed.
Top of front panel lock prevents accidental power button presses when locked.
Guide to installing power and reset switch connectors on the motherboard.
Details polarity and connection for Power LED and HDD LED wires.
Provides pin definitions for USB 3.0 and HD Audio connectors.
Specifies the maximum CPU cooler height allowed within the case.
Details depth limit and cable length recommendations for power supplies.
Defines the maximum length for low profile expansion cards.
Specifies maximum length for optical drives and PSU compatibility.
Notes that IDE drives cannot be installed in the lower left cage due to ribbon cable.
Details the flexible design of the drive cage for various drive installations.
Recommends regular cleaning of PSU filters to ensure optimal performance.
Discusses oversized CPU venting and optional fan installations for better cooling.
Guide on installing the VGA (D-sub) connector using the case cutout.
Explains how motherboard/GPU configurations affect VGA cutout use.
Instructions on using a hex screwdriver to remove the standard slot from a graphics card.
Guide to breaking out the case cutout and installing the VGA connector.
