SilverStone Precision Series

To Next Page

NO:G11222430

Quick access filters for easy cleaning

Motherboard back plate opening for quick CPU cooler assembly

Mesh front panel intake maximizes airflow with side window for viewing system innards (PS11-W)

Front-side intake vents with foam padded side panels to minimize noise (PS11-Q)

All black painted interior for stylish look

Support graphics cards up to 16.2 inches

(Q)

(W)

Warranty Information

This product has a limited 1 year warranty in North America and Australia.

For information on warranty periods in other regions, please contact your reseller or SilverStone authorized distributor.

1. Product component defects or damages resulted from defective production is covered under warranty.

Defects or damages with the following conditions will be fixed or replaced under SilverStone Technology’s jurisdiction.

a) Usage in accordance with instructions provided in this manual, with no misuse, overuse, or other inappropriate actions.

b) Damage not caused by natural disaster (thunder, fire, earthquake, flood, salt, wind, insect, animals, etc…)

c) Product is not disassembled, modified, or fixed. Components not disassembled or replaced.

d) Warranty mark/stickers are not removed or broken.

Loss or damages resulted from conditions other than ones listed above are not covered under warranty.

2. Under warranty, SilverStone Technology’s maximum liability is limited to the current market value for the product (depreciated value, excluding

shipping, handling, and other fees). SilverStone Technology is not responsible for other damages or loss associated with the use of product.

3. Under warranty, SilverStone Technology is obligated to repair or replace its defective products. Under no circumstances will SilverStone

Technology be liable for damages in connection with the sale, purchase, or use including but not limited to loss of data, loss of business, loss of

profits, loss of use of the product or incidental or consequential damage whether or not foreseeable and whether or not based on breach of warranty,

contract or negligence, even if SilverStone Technology has been advised of the possibility of such damages.

4. Warranty covers only the original purchaser through authorized SilverStone distributors and resellers and is not transferable to a second hand

purchaser.

5. You must provide sales receipt or invoice with clear indication of purchase date to determine warranty eligibility.

6. If a problem develops during the warranty period, please contact your retailer/reseller/SilverStone authorized distributors or SilverStone

http://www.silverstonetek.com.

Please note that: (i) You must provide proof of original purchase of the product by a dated itemized receipt; (ii) You shall bear the cost of shipping

(or otherwise transporting) the product to SilverStone authorized distributors. SilverStone authorized distributors will bear the cost of shipping

(or otherwise transporting) the product back to you after completing the warranty service; (iii) Before you send the product, you must be issued a

Return Merchandise Authorization (“RMA”) number from SilverStone. Updated warranty information will be posted on SilverStone’s official website.

Please visit http://www.silverstonetek.com for the latest updates.

Warranty terms & conditions

Additional info & contacts

For North America (usasupport@silverstonetek.com)

SilverStone Technology in North America may repair or replace defective product with refurbished product that is not new but has been functionally tested.

Replacement product will be warranted for remainder of the warranty period or thirty days, whichever is longer. All products should be sent

back to the place of purchase if it is within 30 days of purchase, after 30 days, customers need to initiate RMA procedure with SilverStone Technology

in USA by first downloading the “USA RMA form for end-users” form from the below link and follow its instructions.

http://silverstonetek.com/contactus.php

For Australia only (support@silverstonetek.com)

Our goods come with guarantees that cannot be excluded under the Australian Consumer Law.

You are entitled to a replacement or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage.

You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.

Please refer to above “Warranty terms & conditions” for further warranty details.

SilverStone Technology Co., Ltd. 12F No. 168 Jiankang Rd., Zhonghe Dist., New Taipei City 235 Taiwan R.O.C. + 886-2-8228-1238

(standard international call charges apply)

For Europe (support.eu@silverstonetek.de)

For all other regions (support@silverstonetek.com)

PS11

A versatile ATX tower case for performance or silence

Model No.

Material

Motherboard

Drive Bay

Cooling System

Expansion Slot

Front I/O Port

Power Supply

Expansion Card

Limitation of CPU cooler

Limitation of PSU

Dimension

SST-PS11B-W / SST-PS11B-Q

Mesh front panel, steel body (SST-PS11B-W) / Plastic front panel, steel body (SST-PS11B-Q)

ATX , Micro ATX

External 5.25” x 2

Internal 3.5" x 3 , 2.5” x 2

Front 2 x 120mm/140mm fan slot, included 1x 120mm 1200rpm fan

Rear 1 x 120mm fan slot

Top 2 x 120mm fan slot (PS11-W)

Bottom 1 x 120mm fan slot

USB 3.0 x 2 / Audio x 1 / MIC x 1

Optional Standard PS2 (ATX)

Compatible with expansion cards up to 16.2” , width restriction - 6.1”

161mm

225mm

215.3mm (W) x 426.5mm (H) x 481.5mm (D), 44L

Special Features

Specifications

uick access

ilters

or eas

cleanin

(Q)

(W)

versatile ATX tower case for performance or silenc

ecial Feature

Other manuals for SilverStone Precision Series

Quick Start Guide2 pages

Need help?

Do you have a question about the SilverStone Precision Series and is the answer not in the manual?

SilverStone Precision Series Specifications

General

Model	PS15
Color	Black
Motherboard Compatibility	Mini-ITX
Material	Steel, Plastic
Front Ports	USB 3.0 x 2, Audio x 1, Mic x 1
Cooling	1 x 120mm fan
Interface	USB 3.0
Drive Bays	2 x 2.5", 1 x 3.5"