Need help?Do you have a question about the SilverStone sg12 and is the answer not in the manual?
General| Model | SST-SG12B |
|---|---|
| Motherboard Support | Mini-ITX |
| Expansion Slots | 2 |
| Type | Mini Tower |
| Material | Steel |
| Drive Bays | 2 x 3.5" |
| Cooling System | Rear: 1 x 120mm fan |
| Front I/O Ports | 2 x USB 3.0, Audio In/Out |
| Power Supply | ATX |
Overview of SilverStone's Sugo series and the SG12 case, highlighting its features and design.
Technical specifications of the SG12 case, including dimensions, materials, and component compatibility.
Defines pinout and installation of front panel connectors (power, reset switches).
Details pin definitions for front panel USB 3.0 and HD audio connectors.
Specifies maximum CPU cooler height and clearance within the SG12 case.
Details maximum PSU length and recommended cable lengths for optimal installation.
Explains how fan thickness affects graphics card length support with compatibility table.
Recommends SilverStone NT06-PRO CPU cooler with fan blowing air upwards for performance.
Discusses CPU cooler fan direction impact on airflow and performance.
Advises choosing CPU coolers with flexible fan mounting for optimal case airflow.
Recommends power supplies with at least 120mm fans for effective overall cooling.
Instructions for removing hard drive bracket fan and related components.
Details removing hard drive bracket screws from the bottom of the case.
Instructions for sliding the drive bracket left to remove it from the case.
Guide on using a long screwdriver to remove fan screws from the drive bracket.
Instructions to repeat previous steps in reverse for reassembling components.
Addresses motherboard drive support limits and recommends expansion cards.
Confirms SG12 case fit in Sugo Pack, noting ample space.
To Next Page