Need help?Do you have a question about the SilverStone FARA R1 and is the answer not in the manual?
General| Type | Mid Tower |
|---|---|
| Motherboard Support | ATX, Micro-ATX, Mini-ITX |
| Material | Steel, Plastic |
| Expansion Slots | 7 |
| Pre-installed Fans | 1 x 120mm rear fan |
| Maximum CPU Cooler Height | 165mm |
| Maximum PSU Length | 160mm |
| Color | Black |
| Drive Bays | 2 x 2.5", 2 x 3.5" |
| Front I/O Ports | 2 x USB 3.0, 1 x Audio In/Out |
| Cooling Support | Front: 3 x 120mm or 2 x 140mm, Top: 2 x 120mm, Rear: 1 x 120mm |
| Radiator Support | Rear: 120mm |
Options for steel or tempered glass side panels for the case.
Procedure for installing the motherboard into the computer case.
Specifications and restrictions for CPU cooler installation height.
Details PSU depth limitations, supporting ATX PSUs up to 196mm.
Guidance on graphics card length support and installation.
Instructions for installing 3.5-inch and 2.5-inch storage devices into drive trays.
Confirmation of the successful completion of all installation steps.
Guide for installing fans on the front or top of the case.
Information on radiator compatibility and mounting options.
To Next Page