2
| 2 8
BEFORE YOU START:
Thank you for purchasing this Sim-Lab product! On the following pages, you will find detailed instructions
on assembly. This requires only a set of simple tools and some of your time. Please check the bill of
materials before starting (page 7) and make sure all the parts are delivered.
This extra mounting point can be installed on either the left or right side of your P1X Pro or GT1 Pro
cockpit. Depending on which side you need the extra mounting point to be, you really only have to swap a
sandwich plate to the side of the upright. That is all there is to it!
Inserting Slot-Nuts:
You got excited, finished the build, put the caps on, but forgot to install
one element. Do not worry. It happens to everyone. In this diagram, you
can see how to insert a Slot-Nut directly into the slot from the side.
You can also use one of your smaller Hex wrenches to help wiggle
the Slot-Nut in place.
5/6MM
Tools needed:
To Next Page
Loading...
