EasyManua.ls Logo

Sim2 CRYSTAL4-SH - Page 50

Sim2 CRYSTAL4-SH
64 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
CRYSTAL4-SH
User Guide
50
Select the DHCP in “On” if the IP Address assignment of the projector has to be done
from an external DHCP server automatically. In DHCP mode IP Address, Subnet Mask,
Default Gateway are not selectable because the server automatically assign a
reference number. With DHCP in “Off status, enter the IP Address, Subnet Mask,
Default Gateway if user need to insert the address manually.
DHCP: choose “On” for an automatic IP assignment from an external DHCP server.
IP Address: select an IP address
Subnet Mask: select subnet mask number
Gateway: select the default gateway of the network connected to the projector.
DNS: select the Domain Name System (DNS), a hierarchical decentralized naming
system.
Reset: choose “Ok” to reset to their default values the items in this sub-menu.
Control
Enable specific communication protocol.
Crestron: choose “On” to enable it.
Extron: choose “On” to enable it.
PJLink: choose “On” to enable it.
AMX Device Discovery: choose “On” to enable it.
HTTP: choose “On” to enable it.
Telnet
Extron
Is a registered trademark of Extron Electronics, Inc. of the United States.
CRYSTAL4-SH is compliant to support Extron device(s) for reference. For more info see
the web site http://www.extron.com/. Ethernet communication port number is 2023.
Crestron
Is a registered trademark of Crestron Electronics, Inc. of the United States.
The CRYSTAL4-SH projector is supported by the specified commands of the Crestron
Electronics controller and related software, for example RoomVie
(www.crestron.com/getroomview). For more info see the web site
http://www.crestron.com/. Ethernet communication port number is 41794.
AMX
Is a registered trademark of AMX LLC of the United States.
This projector is supported by AMX ( Device Discovery ), see http://www.amx.com/.
Ethernet communication port number is 9131.
PJLink
Applied for trademark and logo registration in Japan, the United States of America,
and other countries by JBMIA. This projector supports all commands of PJLink Class1
(Version 1.00), see http://pjlink.jbmia.or.jp/english/. Port number is 4352.

Related product manuals