18
First Start
1 Power on / off
Connect the power cord of this device to a 220 V AC power socket.
Press the Standby button on the remote control to turn on this device, and then follow the
navigation prompts after booting to complete settings (the navigation information after
booting is subject to the actual situation).
This device will be in standby state when pressing the Standby button on the remote control
in the power-on state; to return to normal watching, just press the Standby button on the
remote control again.
Please disconnect the power supply when this device is not in use for a long time.
[Note]
After DC shutdown, please restart this device after at least 5 seconds to prevent
abnormalities.
2 Adjust Local Settings
Using the settings function can meet your different needs and make you fully enjoy the
audio-visual effects brought by this device.
You can adjust images and sound, set network connection, etc. here.
Press the Settings button on the remote control to access the settings interface to adjust each
device.
In menus at all levels, you can perform the following operations according to different
menus:
Press Arrow buttons to select items
Press the OK button to confirm operations or access the next menu
Press Left and Right buttons to adjust values
Press Up and Down buttons to adjust options
Press the Return button to the previous menu or exit the Settings menu.
To Next Page
