Simagic GT1 HUB User Manual
Gt1 HUB provides firmware upgrade service. You only need to follow the steps below:
②Go to race manager folder and open the "Updatehub" program.
③Upgrade according to the procedure prompts.
1.Click the“Check Update”
2.After checking, the version can be upgraded
Click the“DownLoad”
3.When the progress bar shows 100%
Upgrading
1 The computer remains connected to the Internet.
The steering wheel must be separated from the
base and connected to the computer through
USB cable from the interface to realize USB networking。
An error message appears:
reconnect the USB cable,
Operate according to the steps after checking.
* The hub must be detached from the base
before updating
* Do not unplug the USB cable during the
update,
* After the update, it can be inserted into the
base for use
To Next Page
Loading...
Need help?
General