scorpION3 5200969 Rev 4
Important Safety Information
Read the complete Instruction Manual before proceeding with
installation or operation. Failure to follow instructions may result
in damage to the scorpION3 system or user supplied power
sources.
When this unit is supplied with the AC adapter, the adapter must
be used with a 3-prong grounding plug. The adapter must be
connected to a properly wired and grounded receptacle. Do not
defeat the electrical ground. Grounding and proper wiring are
required for operation.
User supplied 24 VDC power must conform to the electrical
characteristics as outlined in this document. Incorrect power
connections to the bar can result in damage to the scorpION3
bar and/or to user power supply.
User connections to the fault output must conform to the limita-
tions outlined for the opto-isolated transistor. Incorrect connec-
tions to the fault interface can result in damage to the
scorpION3 bar.
Interconnection between bars should be made only with Simco-
Ion supplied interconnect wiring.
A factory-qualified service technician must perform component
service and repairs.
Carefully read the following safety information before
installing or operating the equipment. Failure to follow
these safety warnings could result in damage to your
ionization system and/or voiding the product warranty.
To Next Page
Loading...