Need help?Do you have a question about the Simco-Ion scorpION3 and is the answer not in the manual?
General| Power Supply | 24 VDC |
|---|---|
| Ionization Method | Pulsed DC |
| Balance | ±10 V |
| Operating Voltage | 24 VDC |
| Type | Ionizing Blower |
| Airflow | 50 CFM |
| Noise Level | 55 dB |
| Operating Temperature | 15°C to 35°C |
Details the scorpION3 bar system for work areas and OEM mini-environments, highlighting its technology.
Outlines key features of the scorpION3 bar, MMI handheld terminal, and CI computer interface.
Guidelines for securely mounting the ionizing bar, protecting emitters, and avoiding grounding interference.
Explains power and communication wiring for independent and multi-bar systems using RJ-11 connectors.
Details assigning unique addresses and understanding indicators for scorpION3 bars in a system.
Covers power distribution, chaining, and addressing for connecting multiple scorpION3 bars.
Describes connection, tubing, and recommended operating pressure for the optional Air Assist feature.
Explains the MMI's functions, LCD display, and IR/wired communication modes for setup.
Details the CI for PC connection, networking, and system control via Ethernet for monitoring and setup.
Discusses adjusting operating parameters, setup recommendations, and typical performance settings for the system.
Covers periodic emitter cleaning and system calibration procedures for optimal performance and emitter life.
Provides detailed instructions for cleaning emitter electrodes using recommended swabs and solutions.
Explains system calibration as a complete performance analysis after maintenance and cleaning.
Describes accessing system diagnostics via MMI and CI for monitoring parameters and fault status.
Lists detailed technical specifications for the scorpION3 bar, Air Assist, AC adapter, and MMI module.
Provides part numbers and descriptions for various scorpION3 ionizing bars and necessary accessories.
To Next Page