Do you have a question about the Sime 2R12 and is the answer not in the manual?
General overview of boiler design and compliance with European directives.
Physical dimensions, connection types, and diagrams for 1R and 2R/2R GT models.
Performance specifications and data tables for "1R" and "2R/2R GT" boilers.
Graphs illustrating pressure loss based on flow rate for different boiler models.
Dimensions and volume of combustion chambers for "1R" and "2R-2R GT" boilers.
Lists compatible gas-oil burners from ECOFLAM, RIELLO, and F.B.R. brands.
Requirements for the boiler room, including standards for heating systems.
Guidelines for positioning the boiler body and required clearances.
System connection procedures, including expansion tanks and water filling.
Importance and requirements for flue connection for proper boiler operation.
Instructions for assembling the boiler body from separate sections using provided tools.
Steps for assembling the boiler casing and control panel using provided parts.
Wiring diagram and connection instructions for the boiler's electrical supply.
Instructions for connecting the RVA 43.222 controller and probes for boiler management.
Recommended checks before and during boiler commissioning.
Step-by-step guide for lighting the boiler and setting operational parameters.
Instructions for cleaning the boiler body and flue pipes at the end of the season.
Critical safety advice for users regarding faults and repairs.
Detailed guide on using the RVA 43.222 controller for heating and hot water management.