Do you have a question about the Sime Brava Slim ErP and is the answer not in the manual?
Verify gas and water isolation valves are open before operation.
Start boiler by setting main switch and operating mode.
Adjust heating system temperature using control buttons.
Set desired temperature for domestic hot water supply.
Interpret error messages displayed on the boiler and initial troubleshooting.
Interrupt boiler operation briefly using the ON/OFF button.
Safely turn off boiler for extended periods of non-use.
Recommend annual maintenance by a qualified technician.
Guidelines for cleaning the boiler's exterior cladding.
Specific instructions for cleaning the boiler's outer casing.
Dispose of boiler as WEEE according to environmental regulations.